rack mount, expandable, ethernet with phone backup, IP monitoring
Whether you have a small room, or a large
data center, the Sensaphone IMS-4000 System provides complete monitoring
for your computer facility. It is designed to monitor your entire
infrastructure, which includes the environment, the physical security,
and the network operation.
The Sensaphone IMS-4000 system is a stand
alone infrastructure monitoring system with an integrated voice and
modem, an internal UPS, flash-disk storage, and a web server, in a
simple-to-install 1U rackmountable package. From the wide array of its
plug-and-play monitoring devices to its sophisticated software, the
IMS-4000 is a complete, flexible, integrated system.
Monitor critical environmental conditions such as Temperature, Humidity,
Smoke, Sound Level, Motion, Water, Intrusion, and Power Outages with the
IMS-4000 Host and Node. Each Host and Node unit supports up to eight
Environmental Sensors. When a sensor exceeds the threshold you
configure— high temperature for example—you are notified by the IMS-4000
about the condition. Lights on the face of the IMS Host instantly reveal
any outstanding problems. With sound level monitoring you can be
notified if an audible alarm goes off, and you can remotely listen in,
via the Host unit, to the server room to assess the situation yourself
at any time.
The IMS-4000 monitors IP Devices through pinging and port availability.
When a network component becomes unavailable, the IMS-4000 notifies you
about which IP device is unavailable. You can monitor the status of
network links, routers, printers and servers—any device which has an IP
address. Each IMS-4000 Host and Node can monitor up to 64 devices. When
a device does not respond to the IMS query, it contacts you immediately
to alert you to the situation.
When a problem occurs in your network, the IMS-4000 will find you and
notify you of the problem no matter where you are. Multiple
communication interfaces— Ethernet port and standard telephone
interface— guarantee that you get the message. You receive early
notification before a problem turns into a disaster. The integrated
modem / voice interface of the IMS-4000 Host means network events and
environmental problems are sent to you in your own voice. When all you
have is a phone, you will still know what’s going on in your network.
You get the message fast.
Curious about your network? You can always obtain status information
about your infrastructure—anytime, anywhere. Call into the IMS-4000
using your computer’s standard dial-up networking. The IMS Console
software operates the same remotely as it does locally for complete
management and control of your IMS system. If you’re not near a
computer, then just pick up any phone and call into the IMS-4000: It
will tell you in a real voice report the status of all conditions.